Vaporized Hydrogen Peroxide Sterilizer Whit Full Stainless Steel Pass Box For Lab Use
Features:
Siemens Programmable Logic Controller (PLC) with color touch screen display works on stable & reliable status and is on simple & intuitive interface.
It has dehumidification function, can adjust and control humidity and temperature, and has low requirements for environment.
It adopts data online printing function.
Indoor temperature is available for low-temperature sterilization process.
Alarming function of failure desiccant is used to hint customer to change new one.
It keeps less residue, the water vapor and oxygen as final decomposed product of hydrogen peroxide, no toxic and side effects;
It has short sterilizing time and low operation cost.
Efficiency of residual removing is high after adopting catalytic decomposition of palladium catalyst after finish of sterilization.
Good compatibility of hydrogen peroxide gas material has great compatibility to plastic, rubber, and electronic products.
Stearothermophilus killing capability is 106 by broad-spectrum sterilization.
It is available for sterilization of enclosed spaces such as vacuum drying oven, isolator and freeze dryer.
Technical Data:
Dimension(L*W*H) | 560*720*1000mm |
Noise | ≤70dB(A) |
Air Flow for Sterilization | ≤2.4m3/min |
Injection Rate | 0~4g/min |
Vaporization Temperature | ≤100℃ |
Humidity for Dehumidification | ≤30%RH |
Sterilizing Space | ≤503 |
Sterilizing Agent | 35% of food grade hydrogen peroxide solution |
Capacity of Sterilizing Agent | 500g |
Dehumidizer | molecular sieve |
Sterilizing Ratio | 106 for Fat thermophilic spore |
Working Mode | Continuous |
Power Supply | AC 220V±22V, frequency 50Hz±1Hz |
Power Requirement | 2500W |
Ground Wire | in effective connection with ground and ground impedance with no more than 4Ω |
Environment Temperature | 20℃ to 40℃ |
Relative Humidity | ≤70%RH |
Compressed Air | ≥0.4 Mpa |
Compressed Air Flow | 36L/min |
Interface of Connected Air | air pipeline at 8 |